(888) 895-7630

Broadband Instruments & Systems

Model Two

Signal Level Meter

Overview
Warranty

Software
Replacement Parts
Accessories
Specifications
Summary

Model Two

Includes the following:

5 - 870 MHz Signal Level Meter
Model Two Protective Bumper (CC-25)
Carrying Case (CC-20)
Shoulder Strap (ST-1)
Charger
Operation Manual on CD.

The Model Two signal level meter is designed for the cable (catv) test environment with installers and field technicians in mind; providing a full complement of measurement functions.

Distribution Signal Level Meter
Verifies system performance using a complete range of measurements
Measures analog and digital carrier levels from 5-870 MHz
5 to 870 MHz Spectrum analyzer range
Large, high-resolution display and easy-to-understand user interface
Ample measurement data storage for unattended test

Designed for the cable test environment while keeping the needs of the installer and field technician in mind, the hand-held Model Two™ signal level meter provides a full complement of measurement functions.

Learned Channel Plans

The Trilithic Model Two can retain up to five user-defined channel plans.

Special Tilt / Favorites Plan

Select up to twelve key channels in each User Plan to be included in a Tilt Favorite Channel Plan of the Model Two.

Informative Measurement Modes

The Trilithic Model Two performs a direct power measurement of QAM signals and even displays the spectrum of the full reverse and forward paths.

Data Storage

The Model Two saves up to thirty-five Level, Tilt, Spectrum, Channel Scan, Limit Test, and AutoTest measurement data files.

AutoTest Programs

Groups of tests can be assembled into automatic procedures that can be executed with one keystroke using the Model Two.

Specifications

Frequency

Range	5 MHz-870 MHz
Accuracy	+/- 50 ppm (20° +/- 5°C
Resolution	10 KHz

Channel Type

Analog TV	TV
Digital TV	QAM, QPSK
FM Channel	Single Frequency, Dual Audio Channels

Level Measurement

Range	-30dBmV to 60 dBmV (30 dBµV to 120 dBµV)
Accuracy (> -25dBmV or 35dBµV)	Level: +/-1.5dB (10°C to 30°C), +/-3dB (-10°C to 40°C) Scan: +/-2dB (10°C to 30°C)
Resolution	0.1dB
Input Impedance	75 Ohms (unbalanced, BNC or F type connector
Number of Channels	150 channels max
Scanning Speed	2.75 channels / sec
Scale	1,2,5,10 dB/div
Zoom	1X, 2X, 3X, 4X, 5X five levels of magnification or full Channel Plan scan

Frequency Spectrum

Bandwidth	2.5 MHz, 6.25 MHz, 12.5 MHz, 25 MHz, 62.5 MHz, and full span
Scale	1,2,5,10 dB/div

Digital Channel (Average) Power

Bandwidth	0.28 to 9.99 MHz
Center Frequency	5 MHz (plus 1/2 Channel bandwidth) to 870 MHz (minus 1/2 Channel bandwidth)
Digital Modulation	QAM, QPSK

Tilt Measurement

Number of Channels	4-12
Resolution	4-12

Limit Test Parameters Any of the following may be enabled:

Min Video	-20 to 59 dBmV (40-119dBμV)
Max Video	-19 to 60 dBmV (41-120dBμV)
Max Δ Video	2-30 dB
Min Δ V/A	0-15 dB
Max Δ V/A	5-30 dB
Max Δ ADJ	0-20 dB
24HR Video Dev.	0-20 dB

AutoTest Up to seven AutoTest Programs, each composed of any combination of Level, Tilt, Spectrum, Limit,
and 24HR Video Dev.

Time Intervals	1 to 23 hours
Test Times	1 to 10 times

Test Data Storage Up to 35 complete Scan files (150 Channels max) or 25 complete Limit Test files
(150 Channels max); Less if other files (Level, Tilt, Spectrum) are saved

Trunk Voltage Measurement

Input Range	1.2-100 VAC, 1.0-100 VDC
Accuracy	+/- 1V
Resolution	0.1V

Other

Communication Port	RS 232C
Printer	Canon, Epson, and HP
Audio Output	Built-in speaker
Dimensions	218 mm X 95 mm X 49 mm (excluding belt clip and RF connector)
Weight	1.45 lbs. (658gm)
Display	128 X 128 LCD with backlight

Power Supply

Battery	3.6 V 3.5 AH Ni-MH battery
Charger	*AC 100-240 V, 50/60 Hz, 1.8A 7VDC (max)
Work Time	Average 6-8 hours (full charge)
Charge Time	Less than 3 hours *Only the Trilithic Charger (P/N 0610165000) with internal charging circuitry may be used

Accessories

Holster for Model Two & Model Three (CC-18)

Belt-mounted holster for the Model Two, Model Two Lite & Model Three; fits with Protective Sleeve (CC-17).
F Style Push On Adaptors

Lab-quality adaptor for precision measurements. Female F-connector to Male push on F-connector. Loss ~ 0.1 dB at 1 GHz.
Precision RF Coaxial Test Cable (I/O-15)

Precision RF coaxial test cable for connecting test equipment. Light, very flexible with a tight bend radius. 0.16” dia, 4’ Long, ~ 0.7 db loss at 1 GHz. Lab-quality Male F-connector on both ends, Includes one (1) F Style Push On Adaptor.
Model Two & Model Two Lite Vehicle Power Adaptor (CL-6)

Vehicle power adaptor with fast charging for the Model Two & Model Two Lite.
Protective Sleeve for Model Two & Model Three (CC-17)

Protective sleeve for the Model Two, Model Two Lite & Model Three.
PC Data Cable for Model One, Model Two, and Model Two Lite (I/O-11)

Data cable for the Model One, Model Two, or Model Two Lite. This data cable is used to connect to a PC using the ToolBox software.
Return Measurement Lowpass Filter (TLB-60)

Return measurement lowpass filter.

Replacement Parts

Model Two Battery

NiCAD battery (fast charging) for the Model Two & Model Two Lite Signal Level Meters.
Model Two Charger

AC to DC power adaptor and battery charger (fast charging) for the Model Two & Model Two Lite Signal Level Meters. Universal 100 - 240 VAC.
Protective Carrying Case for Model Two & Model Three (CC-20)

Protective carrying case with foam insert for the Model Two, Model Two Lite & Model Three.
Strap for Model One and Model Two (ST-1)

Shoulder strap for use with the Model One & Two Family Carrying Case (CC-20).
Model Two and Model Three Orange Rubber Protective Bumper (CC-25)

Orange rubber protective bumper for the Model One, Model Two, Model Two Lite & Model Three.

Software

ToolBox

Companion software for the Model Two & Model Two Lite. The software includes the Model Two & Model Two Lite 9-Pin Data Cable (I/O-11) and Operation Manual on CD for the Model Two & Model Two Lite Signal Level Meters. Now with POPConverter.

Warranty

Repairs

All repairs carry a 90-day warranty against defects in replacement parts and repair workmanship.

Products

All Trilithic products are warranted against defects in materials or workmanship for a minimum of one year after shipment.

Trilithic's obligation under this warranty is limited to the repair or replacement of the product after being returned to our factory, and Trilithic determining the product be indeed defective.

This is Trilithic's sole warranty and is given in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for a particular purpose and sets forth the buyers sole remedy.

The following products carry a Manufacturers One Year Warranty

8821Q, 8821Q-R & 8853Q	Rotary & Benchtop Attenuators	TFS-3200 Series
APSS-1B	TFS-201	TFS-FS1
DCVF-5	TFS-290 Series	TFS-FS1K500 Series
Impedance Matching Pads	TFS-301	TLB-60
I-Stop	TFS-401	Tunable Filters
Programmable RF Switches	TFS-2000 Series	VF-4 & VF-5

The following products carry a Manufacturers Two Year Warranty

860 DSP & 860 DSPi	9581 SST R3 & 9581 SST R4	RSVP²
860 DSPh & Input Expander	9581 TPX	Seeker Lite²
860 DSPr	CT-2/ CT-3	Seeker
8300 FST	Model Two	Seeker MCA
8310 RSA	Model Three	Seeker BB-2

The following products carry a Dell Three Year Warranty

All Specially Configured Dell PowerEdge 2U Rack Mount Server products are warranted against defects in materials or workmanship for a minimum of three years after shipment. Dell provides next business day, parts and labor, on-site response for the following Trilithic products.

ADIA Integrated Server Package	LAW Server Package
Guardian II Integrated Server Package	Trilithic Data Manager (TDM) Integrated Server Package

Model Two

Signal Level Meter

<a href='#tmpProductTabs'>Top</a> Model Two

Includes the following:

Learned Channel Plans

Special Tilt / Favorites Plan

Informative Measurement Modes

Data Storage

AutoTest Programs

<a href='#tmpProductTabs'>Top</a> Specifications

Frequency

Channel Type

Level Measurement

Frequency Spectrum

Digital Channel (Average) Power

Tilt Measurement

Limit Test Parameters Any of the following may be enabled:

AutoTest Up to seven AutoTest Programs, each composed of any combination of Level, Tilt, Spectrum, Limit, and 24HR Video Dev.

Test Data Storage Up to 35 complete Scan files (150 Channels max) or 25 complete Limit Test files (150 Channels max); Less if other files (Level, Tilt, Spectrum) are saved

Trunk Voltage Measurement

Other

Power Supply

<a href='#tmpProductTabs'>Top</a> Accessories

Holster for Model Two & Model Three (CC-18)

F Style Push On Adaptors

Precision RF Coaxial Test Cable (I/O-15)

Model Two & Model Two Lite Vehicle Power Adaptor (CL-6)

Protective Sleeve for Model Two & Model Three (CC-17)

PC Data Cable for Model One, Model Two, and Model Two Lite (I/O-11)

Return Measurement Lowpass Filter (TLB-60)

<a href='#tmpProductTabs'>Top</a> Replacement Parts

Model Two Battery

Model Two Charger

Protective Carrying Case for Model Two & Model Three (CC-20)

Strap for Model One and Model Two (ST-1)

Model Two and Model Three Orange Rubber Protective Bumper (CC-25)

<a href='#tmpProductTabs'>Top</a> Software

ToolBox

<a href='#tmpProductTabs'>Top</a> Warranty

Repairs

Products

The following products carry a Manufacturers One Year Warranty

The following products carry a Manufacturers Two Year Warranty

The following products carry a Dell Three Year Warranty

Translate Page

Session Alert

Sign In

Model Two

Specifications

AutoTest Up to seven AutoTest Programs, each composed of any combination of Level, Tilt, Spectrum, Limit,
and 24HR Video Dev.

Test Data Storage Up to 35 complete Scan files (150 Channels max) or 25 complete Limit Test files
(150 Channels max); Less if other files (Level, Tilt, Spectrum) are saved

Accessories

Replacement Parts

Software

Warranty